mount network drive at biodesign

2013-12-01

azim58 - mount network drive at biodesign

mount on Linux
here's some information from Josh
(in an e-mail 4-11-13)

===========================================================================
I figured out how I did my filesystem mount. The guide is here:
http://www.cyberciti.biz/faq/configure-a-system-to-automount-a-samba-share-
with-etcfstab/
You need to modify your /etc/fstab file:
type:
sudo nano /etc/fstab

Here is my file:

1. /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a

1. device; this may be used with UUID= as a more robust way to name
   devices
2. that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>

1. / was on /dev/sda5 during installation
UUID=bb5f1c3e-1a31-4bc1-88b9-139f12a083bc / ext4 errors=remount-ro 0 1

1. swap was on /dev/sda6 during installation
UUID=df133b45-3911-45de-9a4d-a3101cc60268 none swap sw 0 0
biofs.asurite.ad.asu.edu/CIM /home/josh/CIM cifs
username=jaricher,password=########,_netdev,file_mode=0777,dir_mode=0777
0 0

If you add the bottom line starting with biofs, change your username and
pw information, it should work hopefully maybe after you restart your
computer.

^Note that I tried this but it didn't really work. I may have done
something wrong.

===========================================================================

azim58wiki: